Hướng dẫn bảo trì phụ tùng máy nén khí
How to maintain air compressor spare parts, please refer to this article...
Any type of machine needs to be periodically checked and maintained for each part to avoid inefficient working or malfunction. And the air compressor should do the same. However, not many users know how to maintain air compressor spare parts to ensure efficiency and avoid unpredictable problems.
So in the article below, we would like to share with you some information you need to know about how to maintain air compressor spare parts. Hopefully thanks to that, your unit can use the device safely and durable at the same time
Oil separator filter maintenance
On average, after about 3000 hours of Airpol compressor, Sullair air compressor, etc., you should replace this spare part once. If the working environment is not good such as too hot or too dusty, you can consider replacing the oil separator filter sooner. With small machines, the filter is separate from the oil tank, we just need to remove and replace this accessory. As for the machine with a large capacity, the oil separator filter is located in the oil tank, when replacing you need to use a wrench to remove the oil tank cap, replace the separator filter and reinstall it. If the oil tank cap rubber seal is degraded and does not seal, the user should replace it.
Oil filter maintenance
With a new air compressor, after the first 500 hours you need to change the oil filter for the device. From the next time, about every 1000 hours of continuous operation, you should replace this air compressor spare part. However, users do not need to be too rigid about the frequency of oil filter changes. For example, with an air compressor operating in a dusty environment, when the differential pressure indicator lights before and after the filter light up, it means that the oil filter is clogged or clogged, you need to replace this component immediately.
>>Read more: Learn about air compressor filter
Clean the air filter
After a period of use, the air filter of the air compressor is often covered with dirt, preventing the flow of air into the machine. Therefore, we need to pay attention to cleaning and maintaining the air filter regularly. Specifically, after each shift or when the differential pressure indicator lights red, the compressor operator needs to remove the air filter to clean the outside of the filter element. Cleaning is quite simple: you just need to use low pressure compressed air to blow outside and inside the air filter, blow from top to bottom, the mouth of the blower needs to be placed about 10mm from the inside of the filter core. And after about 1000 hours of using an industrial air compressor, you should change the air filter to ensure that the device always works well.
Maintenance of piston compressor cylinders
The cylinder is also known as the inlet valve of the piston compressor. When the cylinder is not flexible, we need to carry out maintenance according to the following procedure: remove the cylinder -> remove the screw base, remove the rubber gasket -> clean the cylinder, spring, piston and change the gasket new rubber -> reinstall the cylinder assembly to its original position.
>>Read more: Where is the best place for spare parts for air compressors?
Hopefully the information shared above has helped you to properly maintain the air compressor spare parts, ensure the equipment always works well, durable at the same time. If you are looking for replacement air compressor accessories, please contact us immediately. Anh Phuong Equipment Co., Ltd is currently providing a lot of genuine air compressor spare parts from the world's leading brands.
Please refer here!