Diagnosing Malfunction of Pumps, Compressors

When your compressor, pump has a problem without detecting the cause, you can rest assured to call us at mobile number 0903036797, our technical department will assist you to solve the problem. This. With over 10 years of experience in the industry, we are confident to do our job in the best way and help you save maximum maintenance costs.

Some common errors in screw air compressors:

Air compressor suddenly stopped working

The air compressor is running but the temperature is very high

The air compressor works but runs without compressed air, no load

Air compressor running with excessive noise

Safety valve jumps or compressed air pressure is too high

Air compressor running low capacity or not generating enough pressure

Air compressor oil is released a lot with the compressed air

Water is mixed in the output compressed air

But the control screen is jumping around or not working

Air compressor overload protection relay works

Some common errors in piston/high pressure compressors:

Piston compressor stops working

Piston air compressor cannot start

Large air compressor oil level consumption

The air compressor does not produce pressure and the air is bounced back to the air filter

When the compressor stops, air leaks through the idle valve line or pressure switch.

High air compressor cylinder temperature

Water mixed in compressed air

Overheat/overload relay jumper

There is a special hissing sound when starting the air compressor or running very noisy.

Some common errors in diaphragm pumps:

Pump stops working suddenly

Spare parts fail quickly compared to durability

The pump is not self-priming liquid

Pumping slow

As for the Tapflo diaphragm pump, there is almost no pump failure caused by defective materials as every pump that comes out of the factory is tested by the manufacturer and is guaranteed by strict quality and test certificates. The above error may be caused by a problem with the air system, the pump runs dry for too long or the high pressure is near the allowable pressure continuously for a long time.