CÁCH LÀM SẠCH KÉT GIẢI NHIỆT MÁY NÉN KHÍ HIỆU QUẢ NHẤT
If you want your unit's air compressor to always operate smoothly, stably, long-term and achieve high efficiency, you cannot ignore the regular cleaning of the radiator.
If you want your unit's compressed air pump to always operate smoothly, stably, long-term and achieve high efficiency, you cannot ignore the regular cleaning of the radiator. This is considered an extremely important part in screw compressors, but cleaning and cleaning this device is not simple, requiring users to have knowledge and equipment. full wake.
Therefore, the information that we share below will tell you how to clean the air compressor cooler simply but with the highest efficiency and safety that users should not ignore.
Learn the function of the cooling tank in the compressed air pump
In screw compressors, the cooling tank is the last point that compressed air passes through before being sent out to the equipment and machinery that need to be used. Therefore, this part plays a function, an equally important role for the pneumatic pump. Specifically, the cooling tank is responsible for helping to cool the compressed air before it is supplied to the equipment and tools using compressed air in the system.
In case there is no cooling tank, the newly generated compressed air source will have a high temperature of about 80 degrees Celsius. This will not guarantee the safety of the filters, other equipment located in the gas system. Compressor works stably, even greatly affecting the life and durability of these gas-using devices.
In addition to helping to cool the compressed air, the radiator unit also helps to reduce the heat for the oil to pass through to cool, bring to the tank and the compressor head. Thereby helping to ensure the quality of the lubricating oil, minimizing the large friction and the ability to generate heat between the components inside the compressor. That way, you can prevent damage or other unwanted incidents from happening. At the same time, it helps prolong the life of the compressor, which is always durable and users save significantly on operating and maintenance costs.
Details of how to clean the air compressor cooler effectively
Normally, depending on the model and brand of production, current compressors will have two cooling (cooling) methods: air-cooled and water-cooled. After a long time of use, these types of cooling methods are susceptible to a lot of dirt, which hinders the process of performing its function. Therefore, here are the cleaning and sanitizing methods specifically for the above two cooling methods:
Clean the air cooler: If the cause of the tank is dusty from the suction air in the environment, you just need to use compressed air from the compressed air pump to spray it clean. But if the amount of dirt is too dense, causing blockage, you need to disassemble each tank detail, then wash it with water and then blow dry. In case, the air cooler is dirty and the cause is oil glue, you need to use a specialized cleaning solution to clean this oil glue. The selection of this tank cleaning chemical solution needs to ensure that it is a specialized, suitable type, and does not contain corrosive acids.
Cleaning the water cooler: Cleaning the water cooler is often complicated and takes a lot more time and effort than the air cooler. First, you need to leave the tank, conduct a preliminary cleaning of the dirt, then soak the tank in a specialized cleaning solution. After checking that the dirt has been completely cleaned, you need to wash it with clean water, dry or blow dry and reinstall it again. Remember, the tank cleaning solution you need to choose is suitable, non-corrosive.
>>Đọc thêm: Các loại máy nén khí Quincy
>>Đọc thêm: Máy nén khí và nguyên lý hoạt động
Hopefully, the above cleaning methods of the air compressor cooler will be useful to you in ensuring this part is always ventilated, operating effectively and properly. And do not forget to share this useful information with everyone around and your friends to know!